Router 5000 Chip

The Router 5000 chip is used to build high performance half-routers that increase the scalability and survivability of LONWORKS® control networks and lower installation costs by allowing mixed physical media to be used in a single installation.

Key Features

  • 3.3V operation
  • Higher Performance: Clock rate up to 40 MHz : Larger buffer size to allow for extended NVs and improved throughput.
  • Transceiver-independent design.
  • Compact 7mm x 7mm 48-pin QFN package.
  • Can be connected to a transceiver running at any LonWorks® bit rate from 610 bps to 1.25Mbps
  • Logical Isolation between two half-routers improves system reliability by isolating failures between channels.
  • Transparent multi-channel and multi-media support.
  • -40°C to +85°C operating temperature range.

Tech Specs

Processor

Neuron 5000 Processor


Processor Input Clock

10 MHz


Operating Input Voltage

3.0 V DC to 3.6 V DC


RoHS-Compliant

The Router 5000 chip is compliant with
the European Directive 2002/95/EC
on the restriction of the use of certain
hazardous substances (RoHS) in electrical
and electronic equipment.


EMC

Depends on network transceiver


Transmission Speed

Depends on network transceiver:
78 kbit/s for TP/FT-10 channel;
1250 kbit/s for TP/XF-1250 channel.
(See EIA-485 channel specification for
transmission speed characteristics.)


Operating Temperature

-40 to 85°C


Operating Humidity

25-90% RH @50°C, non-condensing.


Non-operating Humidity

95% RH @ 50°C, non-condensing.


Reflow Soldering Temperature Profile

Refer to Joint Industry Standard
document IPC/JEDEC J-STD-020D.1
(March 2008).


Peak Reflow Soldering Temperature

260°C


Recommended Router 5000

Chip Pad Layout

Connect with us.

We can help you unleash your industrial systems data for IoT, cloud and AI services.